Camaro 5th Gen Carbon Fiber Hood

• Uses all OE mounting points for latch and hood struts.

• Full 100% Carbon Fiber top with a full Fiber Glass Frame support exactly like the OE hood.

Please note that this hood is for OFF ROAD USE ONLY! It is mandatory that you use hood pins or another locking device for safety reasons!
 

TERMS AND CONDITIONS for Purchase of Carbon Fiber Hood from Maverick Man Inc.

All orders placed with Maverick Man, Inc. (though this website, phone, fax, mail, verbal, or
e-mail), directly or in any other way constitute the acknowledgment and
acceptance of all of the conditions listed below:


Warranty and Disclaimer

Items sold by Maverick Man, Inc. may not be legal for street use in all
states. It is the buyer’s responsibility to comply with applicable state
laws. Buyer understands that due to strict U.S. Federal and State safety
crash guidelines, Maverick Man, Inc is not responsible or liable for any
damages or possible injuries incurred upon possible accidents due to
driver error, incorrect installations, bad judgment, or act of nature,
God, Allah, Jehovah, or whomever you believe in. All products are intended
for off-highway uses only, and should be used for their intended purposes
only. Maverick Man, Inc does not take responsibility over buyer
installation, modification, and unusual stress of the products. The buyer
assumes all responsibilities for determining the suitability of the
products. Maverick Man, Inc is not responsible for any damages incurred
either directly or indirectly on the vehicles or operators/passengers
within the vehicles.


Installation

All products require professional installation. Buyer understands that
some products may require modifications for correct fitment. Minor
adjustments may be necessary as part of the normal installation process.
All hoods require hood pins for safety reasons. All carbon fiber products
will not sustain any force or weight, for they could be cracked by such
force or weight. Maverick Man, Inc has made an effort to produce all its
aftermarket products to fit the original factory vehicles as closely as
possible. However, some occasional prepping may be necessary for an ideal
fit. The buyer needs to perform these steps to his/her satisfaction before
installation. If the buyer wishes to paint the products, he or she must
pre-fit the parts to the vehicle before painting to ensure proper fit.
There are absolutely no returns on painted products.


Shipping Damage

Maverick Man, Inc packs all products carefully to prevent damage during
shipping. However, damage may still occur occasionally. Buyer must inspect
the packaging and the products carefully upon receiving them, then accept
the shipment and notate any damages and irregularities, such as crushed,
torn, punctured, or broken parts on both the packaging and the product, on
the freight bill or receipt at the driver’s presence. NO NOT LET THE
DRIVER NOTE DAMAGES FOR YOU! WRITE IT IN YOURSELF! Buyer must retain all
cartons, packing materials, and damaged products for the carrier’s damage
inspector to inspect. Do not refuse shipment or return it without
approval, because the buyer’s right to make a damage claim may be denied.
A signed receipt without any notation indemnified the carrier as well as
Maverick Man, Inc from any further damage claims. Discovery of damages
after a clear delivery becomes the responsibility of the customer.

All damages must be notified to carrier and the Maverick Man Carbon Inc.
within 24 hours. In cases of damage with proper notation on receipt, the
carrier will determine whether to pay for repair cost or replacement value
of thedamaged goods after damage inspection. Replacement value is the amount the
buyer paid to the distributor and is not negotiable. All disputes about
the settlement amount should be addressed with the carrier. Maverick Man,
Inc, under no circumstances, shall be liable for the damaged product or
for subsequent settlement of the claim with the carrier.


Defective Products

All products require professional installation. Minor adjustments might be
necessary. These are normal body work and installation steps. Therefore it
is NOT considered to be defective. In addition, most carbon fiber products
are hand-crafted, and no two items will be identical. Small imperfections
such as wavy weaves, small bubbles, and clear coat blemishes are
inevitable. Pictures are required to demonstrate true defects on products
prior to return.

DO NOT throw out packing until you are 100% sure it has no reason to be returned.
Any and all returns must be shipped back in the original packing it was received in.
Packing which includes both sides of the box, both wood supports and styrofoam.